Playing Music

At Newtown Fitness Club we have installed a Bluetooth stereo receiver for our user’s to connect to and stream their music while they are working out. In this post we will go over the process to connect to and disconnect form the receiver.

The Bluetooth Receiver shown above is the exact one we have installed in the facility. The actual receiver box is in the small closet immediately adjacent to the heavy punching bag. Generally you will never need to physically interact with the receiver.

Please Note: In order to be considerate neighbors to other tenants in the building, DO NOT change the volume setting on the device itself. It has been set to a reasonable maximum volume.

In order to connect:

1. Turn on your phone/device Bluetooth
2. Locate the Device “PYLEUSA” and Connect
3. You will hear the speakers chime
4. You should now be able to stream your music

Below is an image of what it may look like on an Android phone.

Having Issues?

If you are having issues connecting to the speaker, below is the protocol which will most likely correct the issue:

1. Go to storage closet near punching bag
2. Find the receiver (image above) on top rack
3. Toggle the power rocker switch off
4. Wait 3 seconds
5. Toggle the power rocker switch on
6. Press the “Mode” button once
7. The device should say “BLUE” on the faceplate
8. Attempt pairing process above again

Still Having Issues?

Please contact management at the phone number or email you were given during the safety training tour of the facility, and we will correct the problem as quickly as we can.